E310 420S ESC

DJI E310 420S ESC

The DJI E310 420S 20A Opto ESC is a replacement ESC for the E310 Tuned Propulsion system. The E310 ESC's are part of the Tuned Propulsion system designed for multi-rotor use, the higher thrust to weight ratio from the E310 system increases the reliability, stability and agility of flight through enhanced aerodynamics and efficiency from the motor and propeller combination.

The DJI 420 ESC's are the most advanced ESC in multirotor industry today because they use a much more efficient sine wave driver which has replaced the traditional square wave driver found in other ESC’s. The addition of a high performance MCU and extra bus communication allows the 420 ESC’s to control the motor in a “closed loop”, while monitoring the health and condition of the system in real time with DJI's "Smart ESC interface". The 420 ESC’s have an anti-spark circuit that is used to protect the circuit and the connectors during removal and connection of power to the ESC. The 420's also have an active braking and energy recovery system that allow for additional manoeuvrability; this also helps to save precious battery power at the same time. The 420 ESC's have a built in LED to help with navigation at longer distances and to communicate the ESC status. DJI have added a data port to the ESC which will allow for future firmware updates online.

The 420 ESC is designed to work with the Tuned Propulsion system and the recomended propeller to use is the 9.4 x 5.0 with the E310 motors which deliver an average of 20-25% improvement over the 8 x 4.5 propellers without the need for an increase in motor size. The higher lift generated from the new profile propeller means that payloads can be increased without the need to upgrade the system when using the DJI 420 ESC.