Team Corally Punisher XP 6S 1/8 - LWB Monster Truck RTR senza batteria e caricabatterie

Raccomandazioni del CER:

• Non per principianti
• Adatto a tutti i terreni
• A prova di spruzzi
• Velocità massima circa 110km/h (6S)
• Necessario per il funzionamento: batteria e caricabatterie e batterie per controller

Punisci la concorrenza con il Monster Truck Punisher XP 6S del Team Corally!



Un Monster Truck in scala 1/8 è la scelta di basher seri a causa delle loro incredibili velocità massime e della capacità di gestire praticamente qualsiasi tipo di pista, superficie o

terreno. Punisher XP 6S 4WD 1/8 Scale Brushless Monster Truck RTR del Team Corally si basa sulla stessa piattaforma dell'acclamato Kronos XP 6S, aggiungendo un nuovo design per carrozzeria, pacchetto grafico, ruote e pneumatici. In grado di gestire un'enorme potenza 6S LiPo e incluso un motore brushless da 2050 KV, puoi dominare completamente i modelli minori sulla tua pista locale, skate park o bash spot. Con il suo aspetto aggressivo, il design ispirato alle corse e le sospensioni morbide, il Punisher XP 6S è in grado di affrontare le condizioni o i terreni più difficili.

Con sospensioni completamente indipendenti, resistente trazione integrale in metallo, telaio da corsa, potenza di trazione del moncone e design aerodinamico della carrozzeria da corsa, il Punisher XP 6S può essere l'ultimo Monster Truck elettrico in scala 1/8 per i conducenti che cercano un'esperienza di attacco senza

pari.

All-Season Driving, Anytime and Anywhere

The Team Corally Punisher XP 6S Monster Truck features a full complement of water-resistant electronics, so it's ready for driving in most any conditions. Not only is the ESC resistant to splashes of water and mud, but the steering servo and receiver are also protected from the elements by special water-resistant PCB coatings. The receiver is further protected by a sealed enclosure to protect against dust, mud, and moisture. Of course, aerospace-quality rubber sealed ball bearings are standard on the Punisher XP 6S, meaning you can drive virtually anywhere and in most any conditions
(Please note: no RC vehicle should be driven or submerged in water or mud. Take care when driving in extreme conditions, and proper maintenance such as cleaning and lubricating should take place after driving in mud, water or near salt water.)

Racing Style Chassis for Extreme Performance

Inspired by top-tier professional racing machines in the RC industry, the Punisher XP 6S 6S utilizes an aluminium pan-style chassis for the most efficient and durable chassis layout. With an optimized forward weight bias, the heaviest drivetrain components and other systems are kept as close to the front as possible. Robust, triangulated front and rear chassis braces provide additional rigidity that allows the aluminium big bore shocks and HiCC8 composite suspension parts to perform without the negative effects of chassis plate flex. The reinforced composite chassis side guards have integrated front brackets to provide additional protection for the polycarbonate body and electronics. The exclusive Team Corally's exclusive SPL system secures shock spring perches and prevents spring misalignment during extreme compression/rebound while the innovative RSP Sway Bar system keeps the Punisher planted in corners and ensures consistent handling on all surfaces.

Massive 2050KV Brushless Power

With a Team Corally Kuron 2050KV 4-pole motor mounted on a torsion-resistant aluminium 2-piece sliding mount, you can be confident of attaining maximum speeds for big-air stunts! The motor is fitted with a hardened steel pinion gear, which mates to a hardened steel spur gear on the center differential.
Looking to achieve remarkable top speeds with a pull of the trigger? Speeds of over 110 km/h (70+ mph) are easy - just fit the appropriate battery!

LiPo Power Ready

The battery holder of the Punisher can fit batteries packs in all the popular sizes and is adjustable for maximum versatility. The versatile Team Corally Kuron 2050KV motor can utilize 4S-6S LiPo batteries to optimize performance on any surface or in any conditions!

Durable Steel Drive System with Three Fluid-Filled Differentials

As usually seen only on premium competition-level RC vehicles, the Punisher is fitted with front, center, and rear silicone fluid-filled and sealed limited-slip differentials that ensure the full amount of power from the 2050KV Kuron motor gets to the ground. With easy removal and maintenance, you can even alter each differential individually to fine-tune the amount of traction at either end of the truggy! Inside, you'll find a complete set of metal gears and outdrive cups that connect to steel central driveshafts. The front end is driven by CVD driveshafts, while the rear is driven by robust metal dogbones, with the entire drivetrain supported by aerospace-quality 8x16x5mm rubber sealed ball bearings for maximum efficiency and durability.

Premium Alloy/Steel Center Differential Assembly

The critical center diff used on the Punisher XP 6S features an aluminium alloy case and durable, steel spur gear for unsurpassed performance and reliability. The metal case allows optimal alignment of the internal gear assembly through improved heat dissipation and reducing fluid loss, while the steel spur gear ensures maximum power delivery and resistance to damage from dirt or debris.

Skid Plates and Braces

The Punisher includes enhanced front and rear composite skid plates to protect the chassis and critical suspension components, especially during insane big-air jumps. The rear wing mount features additional bracing to maintain proper wing alignment during the most severe jumps and occasional tumbles, while the additional front upper arm brace keeps critical suspension components properly aligned during the harshest bashing use.

Adjustable Battery Mount

The innovative battery mount allows the Punisher XP 6S to conveniently secure most any 4S-6S LiPo made for surface vehicles, protecting your battery investment, while providing optimum weight distribution.

Optimized Racing Suspension

The Punisher XP 6S features a robust pivot ball-style front suspension utilizing steel pivots and steering turnbuckles in addition to durable composite suspension arms. The rear suspension features composite outboard hubs and one-piece composite upper suspension links. At each corner, durable HiCC8 composite suspension arms and threaded, adjustable 16mm big bore oil-filled shock absorbers produce plush, compliant handling.

Multi-Block Stunt Tyres

The grippy rubber tyres are designed specifically for monster bashing, featuring foam inner liners and glued on aggressive-looking honeycomb spoke wheels on 17mm hex drive hubs. The aggressive tread pattern in combination with the low-profile sidewall design minimizes ballooning and provides maximum grip for maximum grip and control on all terrain.

Varioprop S2R Steering Wheel Controller

The Punisher is fully controlled by the ergonomically designed pistol-grip style radio transmitter, which features the latest 2.4GHz technology for interference-free control at a distance of 300m. The realistic steering wheel design makes driving intuitive and comfortable. The pistol grip trigger provides perfect control of the throttle, with forward and reverse controls combined in a single control. Learning how to control the Punisher is quick and easy with the S2R controller!

The Punisher XP 6S RTR is an exciting, impressive all-terrain machine! If you're looking to make an all-out assault on lesser cars with speed and jumping capability that other cars simply cannot duplicate, then look no further than the Punisher XP 6S RTR from Team Corally.

Punisher Features:

• 100+ km/h (60+ mph) possible
• Factory-built 1/8 scale competition-capable truggy with electronics, bodyshell and tyres installed
• Team Corally TOROX 185 ESC 4-6S with LiPo low-voltage protection (programmable)
• Team Corally Kuron 2050kV 4-pole brushless motor (4-6S operation)
• Varioprop CRHV-7225 High Torque, High Voltage Digital Servo with Metal Gears and 25Kg Torque
• Ergonomic Varioprop S2R transmitter, with interference-free 2.4GHz technology
• Aluminium servo arm for precision and strength
• 3mm 7075 Aluminum Steering Ackermann Plate
• Separate splash-proof and dust proof electronic box with transponder mount
• Adjustable battery holder for all common LiPo batteries
• Full set of aerospace-quality, rubber-sealed ball bearings
• Oversized 8 x 16 x 5mm transmission ball bearings
• Hardened steel spur gear and motor pinion
• Three sealed metal differentials individually filled with silicone fluid
• Aluminum/Steel center differential
• Quick and convenient diff access
• 2-piece aluminium motor mount with composite gear cover
• 52T Steel Spur Gear
• Completely Hard-coated metal drive train
• Extra Surface-Hardened Steel Front CVD Joints
• Aluminium 17 mm drive hexes
• Oil-filled threaded 16 mm aluminium Big Bore shocks
• Exclusive shock spring perch locking system
• Torri ammortizzatori in alluminio CNC, 5mm posteriore / 4mm anteriore
• Piastra di irrigidimento del braccio anteriore in lega
• Sospensione anteriore indipendente Pivot Ball
• Sospensione posteriore indipendente a doppio braccio oscillante
• Maglie di sospensione e tiranti compositi monopezzere per impieghi gravosi
• Supporti a sospensione in alluminio con coperchio composito
• Sistema barra antirollio anteriore e posteriore Team Corally RSP
• Piastra del telaio in alluminio
• Tutori del telaio anteriore e posteriore per impieghi gravosi
• Protezioni laterali del telaio rinforzate con protezione del corpo integrata
• Paraurti anteriore con protezione aggiuntiva del telaio che assorbe gli impatti
• Ala rinforzata ad alta deportanza e supporto alare
• Pneumatici incollati in fabbrica ad alta velocità e basso profilo su ruote composite a più razze nere
• Corpo in policarbonato stampato resistente e attraente
• Molte parti di tuning opzionali disponibili per la personalizzazione individuale

Indicazioni:

• Scala: Scala 1/8
• Tipo di motore: motore brushless a 4 poli 2050kV 2-6S
• Tipo di modello di auto: Electric Powered 4WD Monster Truck RTR - 6S Brushless Power
• Peso (g): 4700 g
• Interato (mm): 384 mm
• Lunghezza (mm): 590 mm
• Larghezza (mm): 455 mm
• Trasmissione: 4WD Shaft Driven
• Ball Beared: set completo di cuscinetti a sfere
• Altezza (mm): 219 mm
• Tipo ESC: Impermeabile 11.1 - 22.2 V brushless - programmabile con LiPo cut off
• Tipo di servo: Digitale - Alta tensione - Ingranaggio metallico - 25 Kg Di coppia
• Tipo di batteria: Non inclusa
• Dimensioni vassoio batteria: (LxWxH): 143x50.5x50 mm
• Funzioni RC: destra / sinistra / avanti / freno / retromarcia
• Caricabatterie: Non incluso
• Articoli richiesti: Quattro batterie (tipo AA) batteria da 7,2-22,2 V con connettore XT90 Caricabatteri